<%@LANGUAGE="JAVASCRIPT" CODEPAGE="936"%> High viscosity Spray Unit-China.Shliangshi Liangshi Blasting & Coating Equipment Co.,Ltd.



Navigation：Spraying equipment : Airless spraying machine series; Two-component spraying equipment
SZB1 Two component extrustion unit: Designed for coating silicone structural adhesive and thio sealant,
A pump and B pump feature machine control direction change,
Typical application: insulating glass and glass curtain wall.
SZB1 Two component extrustion unit
SZB1 Two component extrustion unit
Model SZB1
A PumpPressure Ratio 16:1
Output 32L/min
Air supply 0.6MPa 1600L/min
Weight 41kg
Dimension 650mm*600mm*1030mm
Range of catalyst 1.2%-5.2%(Ⅰ) 0.6%-2.6%(Ⅱ)
Increase of adjustment 0.1-0.2%
General two component spray unit. Its special features include a broad range of available ratio, a high ressure. the new Mode makes two component materials metering and spray easy and accurate.
Sitable material: each kind of high performance heavy duty two component coatings.
SZ6517 Two Component Spray Unit
SZ6517 Two Component Spray Unit
Model SZ6517
Pressure Ratio 65:1
Output 17L/min
Air supply 0.6MPa 2500L/min
Weight 90kg
Dimension 650mm*600mm*1030mm
High viscosity spray unit：Airless pressure feed and air atomization are used in this series.
Suitable for spraying high viscosity coating with bad fluidity or no fluidity. Some of them contains short fiber and small grain, inchluding thermo-insulating and sound-deadened coatings, such as asphalt asbestos and as phalt rubber.
Typical application: steering room of automobile, locomotive, cabin.
GN-2A High viscosity spray unit
GN-2A High viscosity spray unit
Model GN-2A GN-3A
Pressure Ratio 13:1 27:1
Output 26L/min 30L/min
Air supply 0.6MPa 1600L/min
Weight 33kg 45kg
Dimension 550mm*580mm*1000mm
Previous - Page 22 - Next - Catalogue
Shanghai Liangshi Blasting&coating Equipment Co.,Ltd.
TEL:+86-21-68907098 68906857 FAX:+86-21-68907128
E-Mail:webmaster@shliangshi.com